3 Engine 22 Seat Tarmac Coach Ramp Bus for Airport DC24V / 240W AIA-1 manufacturer from China Xinfa Airport Equipment Company

3 Engine 22 Seat Tarmac Coach Ramp Bus for Airport DC24V / 240W

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Tarmac Coach Euro 3 Engine 22 Seats 9m Turning Radius

Description:

Tarmac Coach Euro 3 Engine 22 Seats 9m Turning Radius

Description:

Xinfa Airport Equipment Ltd. (“Xinfa” for short) established in 1997, initially owned by Beijing BOWEI airport facilities management Co. Ltd. (a subsidiary of Beijing Capital International Airport Group Co.). At the date of January 4th 2012, Shenzhen CIMC-Tianda Airport Support Ltd.( the Airport Facilities of CIMC Group) officially became the biggest shareholder by purchase 70% shares. Xinfa registered capital was increased to twenty five million RMB eventually.

Specification:

No.	Particulars	Specs
1.	Length × Width ×Height	10600mm×2700mm×3170mm
2.	Bus body	Low carbon alloy steel body with aluminum apron;
3.	Wheel base	5100mm
4.	Passenger accommodation capacity	Up to 51 passengers including fourteen (13) seats, in compliance with IATA specifications: four (4) Passengers per sqm
5.	Curb weight	11250kgs
6.	The varied height from passenger cabin floor sill to the ground level	270mm~340mm subject to embarkation and/or disembarkation of passengers
7.	Minimum turning radius	<9200mm
8.	Engine	CUMMINS ISDE180-30,EUROIII,132KW/2500rpm,ALLISON2100

Defroster in driver's cabin

Model: [CS-13/01]

Motor: DC24V, 240W

Heat output: 7.5KW (when water temp. at 80°C)

Audio

Radio + CD + MP3

(2 Speakers in Driver’s cabin, 8 speakers in Passenger’s cabin)

Emergency system 1	The emergency switch for unlocking and opening passenger door is located above each door; The instruction is labeled beside emergency switch. The emergency switch for driver to open front passenger door is located on the dashboard;
Emergency system 2	Set the brake system discharge device by following the instruction labeled; The emergency cover on wheel cover should be sealed to prevent from waterproof;